Options Tab Settings; Settings - Xerox WorkCentre 7132 User Manual

2 Operation with Windows 95/98/Me

Options Tab Settings

This section describes the settings in the Options tab.
Select the items in Hardware Options and change them in the Change box below. To
use this function, it is necessary to make appropriate settings in this tab.
NOTE: You can restore defaults by clicking [Default].

Settings

Paper Tray Configuration - Specifies the paper tray type installed on the machine.
When [1-Tray] is selected, Tray 1 is available (standard configuration).
When [3-Tray] is selected, Tray 2 and Tray 3 are installed.
When [3-Tray (High Capacity)] is selected, the two-tray module Tray 2 and Tray 3 is
installed.
Duplex Unit - Specifies whether the duplex unit is installed. If it is, set to [Available].
Output Options - Specifies whether the inner output tray or finisher output unit is
installed.
Side Output Tray - Specifies whether the side output tray is installed. If it is, set to
[Available].
Hard Disk - Specifies whether the Hard Disk (optional) is installed. If it is, set to
[Available].
Memory - Specifies the amount of printer memory.
14 Xerox WorkCentre 7132 PostScript® User Guide