4 Operation with Windows 2000, Windows XP and Windows Server 2003
Hard Disk - Specifies whether the Hard Disk (optional) is installed. If it is, set to
[Available].
Configuration Tab Settings
This section describes the settings of the Configuration tab.
NOTE: You can restore defaults by clicking [Defaults].
Settings
Account Mode - Specifies if all users or only System Administrators can change
authentication related settings.
Detailed User Settings - Sets the authentication information.
Use Default User Settings - The values set in this feature are used as the
authentication parameters.
– Specify User ID - Select how to specify User ID.
– User ID - Enter a User ID.
– Password - Enter the Password for the User ID.
– Account ID - Enter an Account ID.
– Billing ID - Enter a User ID for Charge Print.
– Password - Enter the Password for the Billing ID.
40
Xerox WorkCentre 7132 PostScript® User Guide