Table of Contents
Advertisement
100 lbs. (45.5 kg)
37.9 inches (963 mm)
52.8 inches (1341 mm)
44.6 inches (1133 mm)
Bond (20 lb.)
Vellum (20 lb.)
Film (4 mil.)
Tracing (4 mil)
Roll Feed - 11 inches to 36 inches (279.4 mm to 914.4 mm)
width 3 inches (76.2 mm) core diameter to 6.7 inches (170.2
mm) O.D.)
Stacker 1000 Operator Manual
Technical data
Maximum of 1000 prints of various sizes
Maximum of 750 D-size (A1) prints
Maximum of 375 E-size (A0) prints
85-264 VAC
47-440 Hz
0 Amps
0.8 Amps (115 VAC) for USA and Canada
0.5 Amps (250 VAC) for EO
The stacker is designed to operate either on a 15 A (115
VAC), 60 Hz for the USA and Canada or on a 20 A (240
VAC), 50 Hz for EO, single phase line with a circuit
breaker. A standard 15A or 20A, three-prong, grounded
receptacle is required.
9
Advertisement
Table of Contents
