Settings - Xerox WorkCentre 7132 User Manual

2 Operation with Windows 95/98/Me
Sample Set - Select when you want to output a sample set.
NOTE: The Collated setting must be selected in the Page Setup tab, under the
application's File menu, when using Job Type.
Delayed Print - Select when you want to output delayed prints.
See the On-line Help for details on the operation of the printer.
User ID - Displays the User ID for Job Type. The user ID displayed is the User ID
specified on the Configuration tab. This option can only be selected when the setting
on the Configuration tab has been completed. This is a display-only item and cannot
be changed here.
Password - Displays password for Secure Print password specified in the
Configuration tab. Each digit that you enter appears as an asterisk (*). This option can
only be selected when the setting on the Configuration tab has been completed. This
is a display-only item and cannot be changed here.
Retrieve Document Name - Select the method of specifying the document name. If
you have selected Auto Retrieve, the valid document name can be up to 24
alphanumeric characters.
Document Name - When "Enter Document Name" is selected in the Retrieve
Document Name list, a document name up to 24 alphanumeric characters can be
specified.
Start Print Time - Specifies the time that a Delayed Print job will be printed. Place the
cursor in the hour or minute box and press the up or down triangle to specify the start
time. You can also set the time by entering the time directly into the boxes. The default
setting is 00:00.

Settings

Fit to New Paper Size - Selects the size of the paper used for output. The output is
automatically enlarged or reduced, depending on the paper size selected here and the
paper size selected in the Paper tab.
For example, when you select [B5] in Paper Size on the Paper tab, and select [A4] as
the new size, the output is automatically enlarged and printed.
When you select [None], the job is printed based on the Paper Size selected in the
application.
Banner Sheet - Specifies whether to add a banner sheet to printed output.
When [Use Printer Settings] is selected, the printer settings are used.
When [Printer Start Page] is selected, outputs the banner sheet using the start-sheet.
E-mail Job Confirmation - Specifies whether to use the Mail Notify feature to notify
the end of the print job via e-mail. Default is [Off].
E-Mail Address - Specifies the e-mail address for the Mail Notify feature.
Display warning message about Output Settings - When printing, the printer driver
checks whether the Output Size setting conflicts with other settings.
When this is activated, a dialog box appears if there is a conflict during printing. Check
the content of the dialog box and resolve the conflicting function to continue printing.
18 Xerox WorkCentre 7132 PostScript® User Guide