Xerox WorkCentre 7132 User Manual page 13

Back Cover - Specifies the paper tray that the back cover stock is to be fed from.
Print on Separators - Specifies whether to print on the transparency separators as
well as the transparency.
Feed Separators from - Specifies the paper tray that transparency separators are to
be fed from. When [Auto] is selected, the tray set on the machine is used as the feed
destination.
Print Mixed Sized Originals - Specifies whether you are printing mixed sized originals
for 2 Sided Print.
Image Enhancement - Specifies whether to use the Image Enhancement function.
Selecting [On] smoothes out boundaries when printing. This reduces jagged edges by
artificially increasing the resolution of the image. When printing a bitmapped image
composed of coarse halftone dots, smooth color gradation is impossible in certain
situations. In this case, select [Off].
Draft Mode - Specifies whether to reduce the amount of toner used when printing
drafts. When [On] is selected, the overall printed color becomes lighter. This is best for
printing documents when high print quality is not necessary.
Substitute Tray - Specifies what action to take when the paper for the print size is not
loaded in the machine.
Use Printer Settings - Use the printer settings. The settings can be confirmed on
the control panel.
Display Message - Displays paper supply messages on the control panel. Printing
is impossible until paper is supplied.
Use Closest Size (Adjust to Fit) - Selects the closest paper size and automatically
adjusts the image size as necessary.
Use Closest Size (No Zoom) - Selects the closest paper size and prints the same
size as the image.
Use Larger Size (Adjust to Fit) - Selects paper larger than the original and
automatically adjusts the image size as necessary.
Use Larger Size (No Zoom) - Selects paper larger than the original and prints the
same size as the image.
Select Tray 5 (Bypass) - Feeds from bypass tray.
Skip Blank Pages - Specifies whether to skip blank pages when printing documents
that contain blank pages.
Custom Paper Auto Orientation - Specifies whether to correct the orientation of the
custom paper.
Brightness - Adjusts the level of brightness applied to the printed images.
Available Printer Memory - Enter the amount of usable printer memory (in KB) in the
Edit box. Usually, it is not necessary to change this.
Available Font Cache - Enter the amount of memory available for the font cache (in
KB) in the Edit box. Usually, it is not necessary to change this.
Account Mode - Specifies if all users or only System Administrators can change
authentication related settings.
Xerox WorkCentre 7132 PostScript® User Guide
2 Operation with Windows 95/98/Me
13