Safety; Safety Message Explanation; Safety Precautions; Important Safety Instructions - Bosch DSA-N2E7X2-08AT Installation Manual

DSA E-Series (E2700)
1

Safety

1.1

Safety message explanation

Warning!
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
!
Caution!
Indicates a hazardous situation which, if not avoided, could result in minor or moderate
!
injury.
Notice!
Indicates a situation which, if not avoided, could result in damage to the equipment or
environment, or data loss.
1.2

Safety precautions

Caution!
Installation should only be performed by qualified service personnel in accordance with
!
applicable local codes.
Caution!
The Low Voltage power supply unit must comply with EN/UL 60950. The power supply must
!
be a SELV-LPS unit or a SELV - Class 2 unit (Safety Extra Low Voltage - Limited Power
Source).
1.3

Important safety instructions

Read, follow, and retain for future reference all of the following safety instructions. Follow all
warnings before operating the device.
–
–
–
–
–
–
–
–
–
–
–
–
Bosch Sicherheitssysteme GmbH
Clean only with a dry cloth. Do not use liquid cleaners or aerosol cleaners.
Do not install device near any heat sources such as radiators, heaters, stoves, or other
equipment (including amplifiers) that produce heat.
Never spill liquid of any kind on the device.
Take precautions to protect the device from power and lightning surges.
Unless qualified, do not attempt to service a damaged device yourself. Refer all servicing
to qualified service personnel.
Install in accordance with the manufacturer's instructions in accordance with applicable
local codes.
Use only attachments/accessories specified by the manufacturer.
Protect all connection cables from possible damage, particularly at connection points.
Do not defeat the safety purpose of a polarized or ground‑type plug.
Permanently connected devices must have an external, readily operable mains plug or
all‑pole mains switch in accordance with installation rules.
Pluggable devices must have an easily accessible socket-outlet installed near the
equipment.
Unplug the unit from the outlet before cleaning. Follow any instructions provided with the
unit.
Installation manual
Safety | en 5
2016.12 | V2.1 | DOC