Bosch DSA-N2E7X2-08AT Installation Manual page 41

DSA E-Series (E2700)
6.
7.
Bosch Sicherheitssysteme GmbH
Installing the drive trays for the E2700 controller-drive tray configurations | en
3
1
1 - Screws for securing the mounting rail to the cabinet (front)
2 - Screws for securing the mounting rail to the cabinet (rear)
3 - Existing tray
4 - Industry standard cabinet
To attach the mounting rails to the cabinet, do one of the following: If you are using the
long fixed-size mounting rails, go to step 7.
If you are using the shorter adjustable mounting rails, go to step 8.
Attach the long fixed-size mounting rails to the cabinet.
– Make sure that the adjustment screws on the mounting rail are loose so that the
mounting rail can extend or contract as needed.
92011-00
7
1
4
1 - Front of the mounting rail
2 - Two M5 screws for the rear EIA support rail
3 - Front of the cabinet
4 - Two M5 screws for the front EIA support rail
5 - Adjustable rail tightening screws
4
92011-01
3
9
Installation manual
2
2
8
6
5
2016.12 | V2.1 | DOC
41