Table of Contents
Advertisement
48
en | Installing the drive trays for the E2700 controller-drive tray configurations
Notice!
Make sure that you do not turn on the power to the drive tray until this installation guide
instructs you to do so.
8.7
Procedure – connecting the power cords
To connect the power cords:
1.
2.
3.
2016.12 | V2.1 | DOC
Make sure that the circuit breakers in the cabinet are turned off.
Make sure that both of the Power switches on the drive trays are turned off.
Connect the primary power cords from the cabinet to the external power source.
1 - Power switches
1
!
Installation manual
DSA E-Series (E2700)
92056.03
Bosch Sicherheitssysteme GmbH
Advertisement
Table of Contents
