About This Document; General Safety Instructions - Bosch Rexroth NK350 Manual

3 609 929 B69/2008-11 | NK350 / NK350S
1

About this document

This manual contains important information
on the safe and appropriate assembly,
transport, commissioning, operation,
maintenance, disassembly and simple
troubleshooting of the NK350/NK350S
network coupler.
Read these instructions completely,
especially chapter "2 General safety
instructions" on page 19, before working
with the NK350/NK350S network coupler.
Related documents
The NK350 or NK350S network coupler is a
system component.
Also observe the instructions for the other
system components.
Also observe the generally applicable, legal
or otherwise binding regulations of European
or national legislation and the rules for the
prevention of accidents and for
environmental protection applicable in your
country.
2 General safety
instructions
The NK350/NK350S network coupler has
been manufactured according to the
accepted rules of current technology. There
is, however, still a danger of personal injury or
damage to equipment if the following general
safety instructions and the warnings before
the steps contained in these instructions are
not complied with.
• Read these instructions completely and
thoroughly before working with the
NK350/NK350S network coupler.
• Keep these instructions in a location where
they are accessible to all users at all times.
Bosch Rexroth AG
• Always include the operating instructions
when you pass the NK350/NK350S
network coupler on to third parties.
Intended use
The NK350/NK350S network coupler is a
component in terms of the machine directive
98/37/EC and is not a ready-for-use
machine. The product is exclusively intended
for being integrated in a machine or system or
for being assembled with other components
to form a machine or system. The product
may be commissioned only if it is integrated
in the machine/system for which it is
designed and the machine/system fully
complies with the EC machine directive.
Observe the operating conditions and
performance limits specified in the technical
data.
The NK350/NK350S network coupler is a
work appliance and not designed for private
use.
Intended use includes having read and
understood these instructions, especially the
chapter "2 General safety instructions".
The NK350/NK350S network coupler is
intended for installation in the BT356 card
rack or the SB35x system box.
Improper use
Any use of the NK350/NK350S network
coupler other than described in chapter
"Intended use" is considered as improper.
Personnel qualifications
Assembly, commissioning and operation,
disassembly, service (including maintenance
and repair) require basic electrical and
mechanical knowledge, as well as
knowledge of the appropriate technical
terms. In order to ensure operating safety,
these activities may therefore only be carried
out by qualified technical personnel or an
instructed person under the direction and
supervision of qualified personnel.
19/96