Miller Maxstar 300 LX Owner's Manual page 5

Declaration of Conformity For
European Community (CE) Products
NOTE
Manufacturer:
Miller Electric Mg. Co.
1635 W. Spencer St.
Appleton, WI 54914 USA
Phone: (920) 734-9821
European Contact Signature:
Declares that the product:
conforms to the following Directives and Standards:
Machinery Directives: 89/392/EEC, 91/368/EEC, 93/C 133/04, 93/68/EEC
Safety Requirements for Arc Welding Equipment part 1: EN 60974-1: 1990
Degrees of Protection provided by Enclosures (IP code): IEC 529: 1989
Electromagnetic compatibility (EMC) Product standard for arc welding equipment:
dec_con1_Ref 6/05
This information is provided for units with CE certification (see rating label on unit.)
European Contact:
Mr. Danilo Fedolfi,
Managing Director
MILLER Europe S.r.l.
Via Privata Iseo 6/E
20098 San Giuliano
Milanese, Italy
Phone: 39(02)98290-1
Fax: 39(02)98290203
Maxstar
Low Voltage Directive: 73/23/EEC
Electromagnetic Capability Directives: 89/336, 92/31/EEC
Arc Welding Equipment Part 1: Welding Power Sources: IEC 974-1
(December 1996 − Draft revision)
Insulation coordination for equipment within low-voltage systems:
Part 1: Principles, requirements and tests: IEC 664-1: 1992
EN50199: August 1995
300 SD, DX, LX
R
Directives
Standards