Miller Maxstar 300 LX Owner's Manual page 42

Changing Programmable TIG Start Polarity (Dynasty Models Only)
B.
1 Amperage Switch Pad
2 Encoder Control
3 Amps Meter
Changing Programmable TIG Start Amperage (All Models)
C.
1 Amperage Switch Pad
2 Encoder Control
3 Amps Meter
D. Changing Programmable Start Time (All Models)
1 Amperage Switch Pad
2 Encoder Control
3 Amps Meter
OM-2222 Page 36
SEL
E−
To adjust TIG Start Polarity, press Amper-
age switch pad. Switch pad LED turns on,
and meter % LED turns on. The current
Start Polarity, SEL] [E−] or [SEL] [EP] is dis-
3
SEL 20
To adjust TIG Start Amperage, press Am-
perage switch pad. Switch pad LED turns
on, and meter A LED turns on. The cur-
rent Start Amperage is displayed on the
3
SEL
10
Or
To adjust Programmable Start Time,
press Amperage switch pad, and meter S
LED turns on. The current Start Time is
3
2
Or Or
1
played on meters, and can be changed
(see Section 5-14) by turning the Encod-
er control.
2
Or Or
1
amps meter, and can be adjusted (see
Section 5-14) by turning the Encoder
control.
2
Or
1
displayed on the amps meter, and can be
adjusted by turning the Encoder control
(see Section 5-14).