Encoder Control; Amperage Control; Ammeter And Parameter Display - Miller Maxstar 300 LX Owner's Manual

5-2.

Encoder Control

5-3.

Amperage Control

5-4.

Ammeter And Parameter Display

1
3
1
Or
1
1 Encoder Control
Use control in conjunction with ap-
plicable front panel function switch
pad to set values for that function.
1 A (Amperage Control)
2 Encoder Control
3 Ammeter
See Section 5-14 for Amperage
2
control range.
Press Amperage switch pad, and
turn Encoder to set weld amperage
or peak amperage when Pulser
function is active (see Section 5-8).
Or
1 Ammeter
Ammeter displays amperage while
welding. It also displays preset pa-
rameters for any of the following:
amperage, time, percentage or fre-
quency. The LED, located directly
below the ammeter, will also illumi-
nate.
OM-2222 Page 25