Installation Requirements; General User Information - Maytag MHN30PDBGW Installation Instructions Manual

INSTALLATION REQUIREMENTS
Gather the required tools and parts before starting installation.
The parts supplied are in the washer drum.
Tools needed for connecting the water inlet hoses
@ Pliers (that open to @~ Flashlight (optional)
39.5 mm [1%s")}
Tools needed for installation
@ Open end wrenches @ Level
@ Torx®t 1-20 Security @ Ruler or measuring tape
screwdriver
@ 1/4" nut driver
Parts supplied
zee)"
D
A. U-shaped hose form E. Removable tie strap
B. Water inlet hoses (2) F. Drain hose
C. Inlet hose washers (4) G. Hose clamp
D. Transit bolt hole plug (4)
Parts supplied for PD Models:
Service door lock cam Foam pads
T® TORX is a registered tradernark of Saturn Fasteners, Inc.
4
Alternate Parts
Your installation may require additional parts. If you are interested
in purchasing one of the items listed here, contact your
authorized Maytag distributor.
if you have You will need to buy
Laundry tub or standpipe Sump pump system (if not already
taller than 2.4 m (96") available)
Overhead sewer Standard 76 L (20 gal.), 762 mm
(30") tall drain tub or utility sink and
sump pump (available from local
plumbing suppliers)
Floor drain Siphon break, Part Number
285834; additional drain hose,
Part Number 8318155; and
connector kit, Part Number 285835
Drain hose too short 1.2 m (4 ft) drain hose extension
kit, Part Number 285863
Pedestal
You have the option of purchasing pedestals separately for this
washer. The pedestal will add to the total height of the washer.
Optional pedestal
Pedestal Approximate Color Part Number
Height height with washer
73mm (27%4") 1207 mm (47.5") White + =WHPO400VW