Installation Requirements; Toolsand Parts; Accessories; Options - Maytag MHN31PDAXW Installation Instructions Manual

iNSTALLATiON R EQUIREMENTS
Toolsand Parts
Gather the required tools and parts before starting installation.
The parts supplied are in the washer drum.
Tools needed for connecting the water inlet hoses
[] Pliers (that open to [] Flashlight (optional)
1 9/16"[39.5 mm])
Tools needed for installation
[] Open end wrenches [] Level
1/2" and 9/16"
[] Wood block
[] Torx T20 O1 Security [] Ruler or measuring tape
screwdriver
[] 1/4" nut driver
Parts supplied
A B C D
A. U-shaped hose form
B. Water inlet hoses (2)
C. Inlet hose washers (4)
D. Transit bolt hole plug (4)
E. Beaded tie strap
Parts supplied for PD Models:
Service door lock cam
Foam pads
Parts supplied for PR Models:
Card reader bezel
Card reader wire Screws (2)
harness
Alternate Parts
Your installation may require additional parts. If you are interested
in purchasing one of the items listed here, call the toll-free
number in the "Assistance or Service" section.
if you have You will need to buy
Laundry tub or standpipe Sump pump system (if not already
taller than 96" (2.4 m) available)
Overhead sewer
Standard 20 gal. (76 L), 30"
(762 mm) tall drain tub or utility
sink and sump pump (available
from local plumbing suppliers)
Floor drain
Siphon break, Part Number
285834; additional drain hose,
Part Number 8318155; and
connector kit, Part Number 285835
Drain hose too short 4 ft (1.2 m) drain hose extension
kit, Part Number 285863
Water faucets beyond 2 longer water fill hoses:
reach of fill hoses 6 ft (1.am) Part Number 76314
10 ft (3.0m) Part Number 350008
Accessories
Enhance your washer with these premium accessories.
For more high-quality items or to order, call 1-800-901-2042, or
visit us at www.whir{pooLcom/accessories. In Canada call:
1-800-807-8777 or visit us at www.whirlpoo{parts.ca.
Part Number Accessory
8212526 Washer drip trays, fits under all
31682 All purpose appliance cleaner
1903WH Laundry supply storage cart
Options
Pedestal
You have the option of purchasing pedestals separately for this
washer. The pedestal will add to the total height of the washer.
Optional pedestal
Pedestal Approximate Color Part Number
Height height with washer
2 7/8"(73 mm) 47.5" (1207 mm) White WHP0400VW
®1 TORX and T20 are registered trademarks of Acument Intellectual Properties, LLC.
4