Installation Requirements; Tools And Parts; Location Requirements - Maytag MVWP575GW Installation Instructions Manual

INSTALLATION REQUIREMENTS

Tools and Parts

Gather required tools and parts before starting installation.
Tools needed:
Adjustable or open-end
wrench 9/16" (14 mm)
4" min
(102 mm)
Wood block
Pliers that open to
1 3 ⁄ " (44.5 mm)
4
Optional tools:
Flashlight
Parts supplied:
NOTE: All parts supplied for installation are in cardboard
insert in the top of the washer.
Drain hose with clamp,
U-form, and cable tie
Level
Ruler or measuring tape
Bucket
Inlet hoses
with flat washers
To order, please refer to toll-free phone numbers on back page
of your Use and Care Guide.
8212656RP 10 ft. (3.0 m) Inlet hose, Black EPDM (2 pack)
n
8212641RP 5 ft. (1.5 m) Inlet hose, Black EPDM (2 pack)
n
8212646RP 4 ft. (1.2 m) Inlet hose, Black EPDM (2 pack)
n
8212545RP 5 ft. (1.5 m) Inlet hose, Red and Blue EPDM
n
(2 pack)
8212487RP 5 ft. (1.5 m) Nylon braided inlet hose (2 pack)
n
8212638RP 6 ft. (1.8 m) Nylon braided inlet hose, space
n
saving 90° elbow, hypro-blue steel couplings
(2 pack)
8212637RP 6 ft. (1.8 m) Inlet hose, Black EPDM, space
n
saving 90° elbow, hypro-blue steel couplings
(2 pack)
Alternate parts:
(Not supplied with washer)
Your installation may require additional parts. To order, please
refer to toll-free numbers on back page of your Use and Care
Guide.
If you have:
Overhead sewer
1" (25 mm) standpipe
Drain hose too short
Lint-clogged drain

LOCATION REQUIREMENTS

Select proper location for your washer, to improve performance
and minimize noise and possible "washer walk." Install your
washer in a basement, laundry room, closet, or recessed area.
Front View
27½"
(699 mm)
42"
(1067 mm)
You will need:
Standard 20 gal. (76 L) 39" (990 mm)
tall drain tub or utility sink, sump
pump, and connectors (available
from local plumbing suppliers)
2" (51 mm) diameter to 1" (25 mm)
diameter Standpipe Adapter
Part Number 3363920
Connector Kit Part Number 285835
Extension Drain Hose
Part Number 285863
Connector Kit Part Number 285835
Drain Protector Part Number 367031
Connector Kit Part Number 285835
Side View
27"
(686 mm)
42"
(1067 mm)
1"
(25 mm)
3