Set-Up Codes Were - Maytag MHN30PDBGW Installation Instructions Manual

3. The QUICK CYCLE button is used to select or deselect
options. CODE EXPLANATION
. . . This option is either SELECTED 'ON' or NOT
NOTE: Prior to operation, a payment system or an OPL kit must SELECTED 'OFF'
be installed on PD models, as part of the set-up. :
Before proceeding, it is worth noting that, despite all of the 9 00 Not Selected 'OFF".
options available, an owner can simply choose to uncrate a new 9 OC Selected 'ON' and not able to be deselected.
commercial washer, hook it up, plug it in, and have a washer Press the QUICK CYCLE button 3 consecutive
that operates. Washers are preset at the factory for an 11-minute times to select 'ON'. Once selected 'ON' it cannot
wash period and 3 rinses (no extra rinse). be deselected.
& ' ~ Press the DELICATES AND KNITS button once to
~ . advance to next code.
@ The DELICATES AND KNITS button will advance you from
code to code. 1 . 00 MONEY COUNTER OPTION
Thi t i o n i s either SELECTED 'ON' or NOT
m The PERM. PRESS button will change the code value. SELECTED 'OFF' or
m@ The QUICK CYCLE button will select or deselect options. 4. 00 Not Selected 'OFF'.
FOR PN MODELS: The set-up codes are the same as for the 4. OC Selected 'ON'.
PD" model except where noted. p the QUICK CYCLE button 3 fi
wo: ress the utton 3 consecutive
The set-up code is indicated by the one or two left-hand ' 'ON? n H
te times to select 'ON' and 3 consecutive times to
characters. The set-up code value is indicated by the two remove (Not Selected 'OFF'.) Counter resets by
or three right-hand characters. The first code shown in each ' ' D e n COND
vn . going from 'OFF' to 'ON'.
section is the Factory Default setting.
- Press the DELICATES AND KNITS button once
CODE EXPLANATION to advance to next code.
6 07 REGULAR CYCLE PRICE (Factory Default) 1 . CO Selected 'ON' and not able to be deselected.
" ; To select 'ON' and not able to be deselected,
6 O07 Represents the number of coins (Coin 1) needed first select 'ON', then within 2 seconds, press
to start the washer, may adjust from 0-39. (See the QUICK CYCLE twice, PERM PRESS once,
VALUE OF COIN 1.) Advance from 0-39 by and exit the set-up mode.
pressing PERM. PRESS button. Factory default
of 7 x coin f. 2. 00 SPECIAL PRICING OPTIONS
. wn as . This option is either SELECTED 'ON' or NOT
With coin slide activation, this code represents SELECTED 'OFF'.
the number of push-in actuations of a coin slide
to start the washer. 2. 00 Not Selected 'OFF', and next available code will
6 01 setting would represent one coin slide be A.00.
actuation. a 2. SP Selected 'ON'. Press the QUICK CYCLE button
NOTE: For coin slide activation, replacement of once for this selection.
the meter case is necessary.
6 00 PN MODELS ONLY: Factory default for 0 coins. if SPECIAL PRICING OPTION is selected, there is access
~ Press the DELICATES AND KNITS button once to codes '3.XX' through '9.XX'.
to advance to next code. > Press the DELICATES AND KNITS button once to
11. WASH LENGTH advance to next code.
11 This is the number of minutes for WASH. Washer Options to use if SPECIAL PRICING is selected:
comes from the factory preset with 11 minutes.
Choose from 9-17 minutes by pressing the PERM O07 SPECIAL CYCLE PRICE
PRESS button. 07 Represents the number of coins (coin 1) needed
- Press the DELICATES AND KNITS button once to to start the washer; may adjust from 0-39. (See
advance to next code. VALUE OF COIN 1.) Advance from 0-39 by
NOTE: This option does not apply to QUICK 3. 00 Pressing the PERM. PRESS button. Factory
CYCLE. default of 7 x coin 1.
8 00 ADDITIONAL RINSE OPTION PN MODELS ONLY: Factory default of 0 coins.
This option is either SELECTED 'ON' or NOT > Press the DELICATES AND KNITS button once
SELECTED 'OFF'. to advance to next code.
8 00 Not Selected 'OFF'. 5. 00 TIME-OF-DAY CLOCK, MINUTES
8 Ar Selected 'ON'. Cannot be combined with the 5. 00 This is the TIME-OF-DAY CLOCK, minute setting;
Super Cycle rinse option. select 0-59 minutes by pressing the PERM.
Press the QUICK CYCLE button once for this PRESS button.
selection. > Press the DELICATES AND KNITS button once
+ Press the DELICATES AND KNITS button once to advance to next code.
to advance to next code. 6. 00 TIME-OF-DAY CLOCK, HOURS
NOTE: Uses the 24 hr. clock
6. 00 This is the TIME-OF-DAY CLOCK, hour setting;
select 0-23 hours by pressing the PERM. PRESS
button.
> Press the DELICATES AND KNITS button once
12
to advance to next code.