Table of Contents
Advertisement
Supervisor level
The selection in the
selection in the
Laundromat, basic
control option is re-
Laundromat Logo
duced.
Once a program has been deacti-
vated,
<empty>
place. You can add a program back in
at any time.
The number of Favorite programs can
be reduced to 0 if you "deactivate" all
programs. In this case, the
selection is no longer displayed in the
main menu.
Do not reduce the number of Fa-
vorites to 0 if you want to set the
Laundromat, basic
control option afterward.
Changing the sequence of Favorite pro-
grams
You can change the sequence of Fa-
vorite programs by moving the pro-
grams around.
Touch the program that you wish to
move.
An orange border appears around the
selected program.
Touch the program with your finger
and keep your finger pressed down.
Drag the program to the required
place.
90
Favorites
and the
and
is displayed in its
Favorites
or
Laundromat Logo
Special programs
You can put together 5 special pro-
grams and save them as your own
wash programs with your own pro-
gram names.
You must have already activated Spe-
cial programs under Program packages.
Enter the name of your special program
and its basic settings into the "Special
programs" table under the "Program
chart".
- Temperature: You can select a tem-
perature in multiple increments from
cold to 195°F (90°C).
- Wash block: You can select one or
more wash blocks.
- Spin speed: You can select a spin
speed in increments from 0 rpm to
1,400 rpm.
Sort programs
Programs can be moved within the
program list and in the Favorites list.
Factory default: Off
Moving programs
Touch the sensor control for the pro-
gram you want to move.
Press and hold the sensor control un-
til the frame changes.
Drag the program to the required
place.
Advertisement
Table of Contents
