Switching on automatic dis-
pensing
Automatic dispensing
Off
KOM module
XCI box
Touch the
COM module
sor control if you want to dispense
detergent externally.
Confirm with the OK sensor control.
The display will change to the next set-
ting.
11:02
OK
or
sen-
XCI box
Initial commissioning
Setting up a payment system
If you wish to set up a payment system,
read the "Payment system" section of
the "Supervisor level" chapter.
These settings can only be changed
during the initial commissioning
process. If you wish to change the set-
tings after the commissioning process,
please contact Miele Technical Service.
If you do not wish to set up a payment
system, you can skip this stage.
Payment system
No payment
system
Program
KOM module
control
Touch the
No payment system
control.
The display will change to the next set-
ting.
Timed
operation
sensor
11:02
OK
21