Initial commissioning
Selecting pre-wash water
Pre-wash
Cold
Hot
Touch the
cold
washing machine is only connected
to a cold water supply, or touch
the washing machine is connected to
cold and hot water.
The display will change to the next set-
ting.
Selecting main wash water
Main wash
Cold
Hot
Touch the
cold
washing machine is only connected
to a cold water supply, or touch
the washing machine is connected to
cold and hot water.
Further information will appear on the
display.
22
sensor control if the
sensor control if the
Removing the shipping struts
11:02
The display will remind you to remove
the shipping struts.
Risk of damage due to failure to
remove the shipping struts.
Failure to remove the shipping struts
can result in damage to the washing
machine and to adjacent cabinetry or
OK
appliances.
Remove the shipping struts as de-
scribed in "Installation and connec-
hot
if
tion".
Confirm that the shipping struts have
been removed with the
control.
Continue setting up as described in the Op-
erating instructions
11:02
Confirm the message with the
sensor control.
OK
OK
if
hot
sensor
OK
appears in the display.