Table of Contents
Advertisement
Installation and connection
Installation locations
Side view
44 9/16" (1,132 mm)
28 1/8" (714 mm)
43 1/3" (1,000 mm)
Washer-dryer stack
The washing machine can be installed
as a washer-dryer stack together with a
Miele Tumble Dryer. This requires a
washer-dryer stacking kit which can be
purchased separately.
70
Installing the washer-dryer stack
on a Miele Plinth is not permitted.
Installation on a plinth
The washing machine can be installed
on a steel plinth (open or closed, e.g.
APCL 002, APCL 003, APCL 005, APCL
007, APCL 011 or APCL 012, available
as an optional Miele accessory) or on a
concrete plinth.
Injury can occur if the washing
machine has not been adequately
secured.
When installing the machine on a
plinth, there is the danger of the
washing machine falling off the plinth
during spinning.
Secure the washing machine using
the clamps supplied.
Installation notes
The distances between the machine
and the wall are recommendations to
help make it easier to carry out service
work. If installation space is limited,
the washing machine can also be
pushed up against the wall.
This washing machine is not suitable
for building under.
Risk of damage due to moisture
ingress.
Moisture can damage electrical com-
ponents.
Do not install the machine near or di-
rectly above an open gully or floor
drain.
Advertisement
Table of Contents
