A fault message appears in the display
Problem
Container empty
Hygiene info: run the
Maintenance hy-
giene program, or a
program of at least
60°C
Check hot water in-
take
Align the machine.
Laundry not properly
spun
Machine is leaking
1
The messages will appear at the end of the program and when the washing ma-
chine is switched on and needs to be confirmed with the OK sensor control.
Frequently asked questions
Possible cause and solution
One of the external detergent containers is empty.
Refill the detergent container.
During the last wash, a wash program with a temper-
ature below 140°F (60°C) or the Drain/Spin program
was selected.
Start a program with a minimum temperature of
140°F (60°C) or the
gram.
The hot water supply is blocked or restricted.
Check whether the hot water supply has been
turned on properly.
Check whether the intake hose is kinked.
The selected spin speed was not reached during the
final spin due to excessive imbalance.
Check that the washing machine is level.
Start the spin cycle again.
The washing machine or drain valve is leaking.
Turn off the water supply.
Contact Technical Service.
1
Maintenance Wash Hygiene
pro-
59