Table of Contents
Advertisement
Supervisor level
Temperature unit
You can select the unit for the temper-
ature display.
Factory default: °F
Weight unit
You can decide whether load quanti-
ties are displayed in "kg" or "lbs". You
can also switch this information off al-
together.
Factory default: lbs
Logo
You can choose whether the "Miele
Professional" logo or your own logo
appears in the display.
The option
Laundromat Logo
lected for the setting
Supervisor code
You can alter the access code to the
Supervisor level.
Enter the current code.
Enter a new code.
88
must be se-
.
Controls
Program selection
Controls
You can select whether the washing
machine is operated as a laundromat
machine. Shortcuts are the easiest
way to operate the machine. Operat-
ing staff are unable to change pre-set
programs.
Tip: Start by configuring all necessary
settings and changes to the washing
machine before selecting any of the op-
tions below.
If "Laundromat, basic" or "Laundromat,
Logo" are selected, the Supervisor level
can no longer be opened from the dis-
play after the Supervisor level is closed.
Please follow the instructions below if
you wish to change any other settings.
Opening the Supervisor level (laundro-
mat version)
Switch on the washing machine and
open the door.
Touch the Start/Stop sensor control
and hold it down whilst carrying out
steps –.
Close the washing machine door.
The Start/Stop sensor control will
now be flashing quickly; wait until it
lights up constantly.
Release the Start/Stop sensor con-
trol when the Start/Stop sensor con-
trol lights up constantly.
Advertisement
Table of Contents
