Fax Mode Settings; Screen Defaults - Xerox CopyCentre 133 User Manual

Maximum Stored Pages
Specify the maximum number of pages to be stored in memory through scanning.
Select the number in the range from 1 to 999.
TIFF Format
Specify the type of the TIFF format to be used when TIFF is selected for saving
scanned data.
Image Transfer Screen
Specify how the screen should appear when scanning is finished. If you select [Hide
Message and Screen], no message is displayed when scanning is finished.

Fax Mode Settings

This screen allows you to change the default settings for the fax mode. There are eight
main setup options available. For more information, refer to the following.
Screen Defaults – page 229
Fax Defaults – page 230
Fax Control – page 231
File Destination/Output Destination – page 234
Reduce/Enlarge Presets – page 235
Scan Size Defaults – page 235
Local Terminal Information – page 236
Internet Fax Control – page 237
1.
Select [Fax Mode Settings] on
the [System Settings] screen.
2.
Select the required option.
3.
Select [Close].

Screen Defaults

Use this feature to define the initial settings for the fax feature screens to suit your
needs.
1.
Select [Screen Defaults] on the
[Fax Mode Settings] screen.
2.
Use the scroll buttons to switch
between screens.
3.
Perform the necessary
operations.
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide
Fax Mode Settings
229