Other Settings; Date Format; Extended Tray Module - Xerox CopyCentre 133 User Manual

11 Setups
Software Options
Specify software options. For information on setting procedures and software codes,
refer to the instruction for the required software option package.

Other Settings

Use this feature to configure various other settings common to the main features such
as copy, fax, and scan.
1.
Select [Other Settings] on the
[Common Settings] screen.
2.
Use the scroll buttons to switch
between screens.
3.
Perform the necessary
operations.
4.
Select [Close].

Date Format

Select the format for date printing for the [Annotation] and [Set Numbering] features.
Set Numbering - Text Size
Specify the size of text used for the [Set Numbering] feature.
Set Numbering - Density
Specify the density of text used for the [Set Numbering] feature.
Offset Stacking (Center Output Tray)
When printing to the Center Output Tray, the machine can slightly offset the paper
output positions for each set (copies) or job (individually instructed print job). This
allows you to identify the start of each set or job.
Offset Stacking (Finisher Tray)
When printing to the Finisher Tray, the machine can slightly offset paper output
positions for each set (copies) or job (individually instructed print job). This allows you
to identify the start of each set or job.

Extended Tray Module

Select the type of the Extended Tray Module used. If the optional finisher is installed,
select [Offset Stacking Module] to enable the Center Output Tray.
Default Print Paper Size
Specify the paper size to be used as the initial setting.
200 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide