Xerox CopyCentre 133 Supplementary Manual page 7

3.
From the device, select
a.
Select the mailbox number to which you want to scan the document.
b.
Load the sample document into the document feeder.
c. Press the Start button.
4. Verify that the scanned document is in the mailbox:
a. Select the mailbox number to which the document was scanned.
b. Select Document
Procedure for Scan to Mailbox Setup through the Control Panel
1. From the All Services
2. Select Mailbox.
3. Select Create/Delete.
4. Use the keypad to enter required information.
Note
If a password is entered for a mailbox, no one else can access that mailbox before entering
the password.
5. From the All Services
a. Select the mailbox number to which you want to scan the document.
b. Load the sample document into the document feeder.
c.
Press the Start button.
6. Verify that the scanned document is in the mailbox:
a.
Select the mailbox number to which the document was scanned.
b. Document
Select
Scan to Mailbox.
List.
menu, select Setup Menu.
menu, select Scan to
List.
Xerox WorkCentre
Mailbox.
®
Pro 123/128/133
5
Quick Scan to Mailbox Setup