Xerox CopyCentre 133 Supplementary Manual page 13

Procedure for Scan to SMB Setup
1. On the control panel, select
2. Enter all the information required. See to the User Guide for more detailed information.
3. Load sample document into the document feeder.
4. Press the Start button.
5. Logon to the SMB server. Navigate to the directory path (repository) that was set up earlier on the server.
Your scanned document can be found in the specified directory.
Note
If Kerberos authentication (remote authentication) has been enabled, a separate login screen appears when
the Scan to SMB feature is selected. Documents are not scanned in unless the Kerberos server
authenticates user access.
Scan To SMB.
Xerox WorkCentre
11
®
Pro 123/128/133
Quick Scan to SMB Setup