Table of Contents
Advertisement
Quickstart Guide
For your convenience a quickstart guide is available from within the
JayCommand/TravelLINK mobile phone app that walks you through
the steps to setup your RV at the campsite or prepare it for travel.
BMPRO MINI SYSTEM (IF EQUIPPED)
The JAYCOMMAND/TravelLINK BMPRO Mini is a control panel used
to monitor and control various systems in your RV.
Refer to the manufacturer's user guide for detailed
operating information.
The system has (3) parts: the NODE, the DISPLAY and the
JAYCOMMAND/TravelLINK Smartphone App. The mini control panel
and the Smartphone App connect to the NODE via Bluetooth. The
JAYCOMMAND/TravelLINK App is available for download for iPhone
or Android devices through the Google Play or Apple App Store.
Some functions may only be available in the app: TPMS, Solar,
Inverter, etc.
The JAYCOMMAND/TravelLINK Mini has Wi-Fi capabilities to connect
to the internet to download the latest app updates.
The following list describes some of the many features this system
may control. Available functions will vary depending on you model.
Some functions will not be installed or may not be available for you
model.
•
RV Auto Leveling System
•
Power Jacks and Stabilizers
•
Interior and Exterior Lighting
•
RV Slideout Rooms
•
Power Awnings
•
HVAC Thermostat
•
Gas and Electric Water Heaters
•
Water Tank Level
•
Water Pump
•
Generator
•
Solar
•
Inverter
ELECTRICAL
Display Control Screen
The following buttons can be found on the display control unit
mounted inside the RV.
Button 1: Page Navigation button allows you to move from
page to page (e.g. Tanks page to Water page).
Button 2: Menu Navigation button allows navigation
between items within a page. (e.g. in the Water page move from
Pump to Elec Water Heater).
Buttons 3 & 4 Action Buttons change functions depending
on the selected menu item. These functions will be displayed on the
screen (e.g. OK, RET, EXT).
Buttons 5: Redundancy Buttons across the bottom of the
display turn on lights, water pumps, and main A/C.
◊
◊
◊
U
Y
NIVERSIT
◊
◊
Pairing your device
To operate the system with your smartphone, you must download
the JAYCOMMAND/TravelLINK App. The NODE can be paired to a
maximum of (4) devices. Follow the instructions in the app to pair to
system.
Display Screens
There are (6) screens (or pages) that are available on the display
screen:
•
•
•
•
•
•
1
2
First button turns on/off all interior lights (long press sets intensity
to 100%).
Second button turns on/off all exterior lights.
Third button turns on/off all interior and exterior lights.
Fourth button turns on/off the water pump.
Fifth button brings up the A/C control screen on the display.
Tanks page displays levels of fresh, black, and gray tanks. All
tanks will appear regardless of whether all are installed.
Water page shows the water pump, water heater elec. and
water heater gas.
Motors page shows all of the slideouts and awnings.
HVAC page operates the AC temperature in the RV.
Energy page shows the generator controls.
Settings page shows pairing, temperature units, software
version, forget all (disconnects paired devices).
3
4
5
6
Page 43
Advertisement
Table of Contents
