Table of Contents
Advertisement
JAYCOMMAND
/TRAVELLINK
®
The JAYCOMMAND/TravelLINK touchscreen is a
wall-mounted control giving you freedom to operate
multiple RV functions from one location inside the
RV.
Refer to the JAYCOMMAND/TravelLINK by BMPRO user guide for
complete operating, setup and programming instructions.
A digital version of the operator manual may be included with
the system. On the HOME screen (upper right corner) press the
SETTINGS button (the small Gear icon) and scroll the screen down
until you see "USER MANUAL". Tap to open.
The complete BMPRO user guide is also available from within the
JAYCOMMAND/TravelLINK App.
The touchscreen and remotes connect to the smart RV system node via
Bluetooth. The JAYCOMMAND/TravelLINK Controller (touchscreen)
has Wi-Fi capabilities to connect to the internet to download the latest
app updates. The system has a downloadable app available for your
smartphone, tablet or smart device.
The following list describes some of the features the smart RV system
may control. Depending on your model or system, not all of these
features will be available.
•
Fresh, black, and gray water tank levels
•
Power jacks, stabilizers, and auto leveling systems
•
Gas and electric water heaters
•
Interior and exterior lights
•
HVAC thermostat
•
Slide-out rooms and power awnings
•
Solar controller
•
Battery levels
•
Water pump
•
Generator
•
Inverter
ELECTRICAL
SYSTEM (IF EQUIPPED)
®
U
Y
NIVERSIT
1
3
EXT
2
4
Touchscreen Control Panel
The row of buttons at the bottom of the touchscreen control certain
pre-programmed features, the slideouts, awnings, lights and water
pump. In the event the touchscreen is not working, this button row
will allow manual operation separate from the touchscreen.
Buttons #1 through #4 are pre-programmed from the factory and
cannot be changed to perform other functions.
Button #1 – Turns all interior lights ON or OFF. Press once
•
for ON, press again for OFF.
Button #2 – Turns all outside lights ON or
•
OFF, which include security lights, awning
lights, and ramp door lights (toy hauler). It
does not operate the front cap LED lights.
Press once for ON, press again for OFF.
Button #3 – Turns inside and outside
•
lights ON or OFF. Press once for ON, press
again for OFF.
Button #4 – Turns water pump ON or
•
OFF.
Arrow Buttons – Use to select
•
awnings or slideouts, pair your smart
phone or tablet to the touchscreen
system, pairing the dedicated remotes,
or to turn the touchscreen display OFF.
RESET Button - There is a small
•
pinhole above the left arrow on
the Menu Display that will reset
the touchscreen.
EXT Button – Use in
•
conjunction with the arrow
buttons to extend an
awning or slideout.
RESET
<ARROWS>
RET
MENU
Page 41
6
Advertisement
Table of Contents
