Supermicro SUPERO PDSBA+ User Manual page 63

PCI-E x1 NIC
PCI Express Port#6
Select Enabled to always enable PCI-Ex1 NIC and all other PCI-E ports. Select
Disabled to disable PCI-Ex1 NIC and all other PCI-E ports. When set to Auto,
PCI-Ex1 NIC will be enabled if a PCI add-on card is detected. The options are
Auto, Enabled and Disabled.
Option ROM Scan
When enabled, this setting will initialize the device expansion ROM. The options
are Enabled and Disabled.
Enable Master
This setting allows you to enable the selected device as the PCI bus master.
The options are Enabled and Disabled.
Latency Timer
This setting allows you to set the clock rate for Bus Master. A high-priority, high-
throughout device may benefi t from a greater clock rate. The options are Default,
0020h, 0040h, 0060h, 0080h, 00A0h, 00C0h, and 00E0h. For Unix, Novelle and
other Operating Systems, please select the option: other. If a drive fails after
the installation of a new software, you might want to change this setting and
try again. A different OS requires a different Bus Master clock rate.
Onboard PCI IDE
Option ROM Scan
When enabled, this setting will initialize the device expansion ROM. The options
are Enabled and Disabled.
Enable Master
This setting allows you to enable the selected device as the PCI bus master.
The options are Enabled and Disabled.
Latency Timer
This setting allows you to set the clock rate for Bus Master. A high-priority, high-
throughout device may benefi t from a greater clock rate. The options are Default,
0020h, 0040h, 0060h, 0080h, 00A0h, 00C0h, and 00E0h. For Unix, Novelle and
other Operating Systems, please select the option: other. If a drive fails after
the installation of a new software, you might want to change this setting and
try again. A different OS requires a different Bus Master clock rate.
IDE RAID Mode
This setting allows you to confi gure the IDE RAID Mode. The options are ATA
and ATA/ATAPI. (*Note: To confi gure ITE RAID settings, please refer to the ITE
RAID documentation included in the CD that came with your motherboard.)
4-13
Chapter 4: BIOS