Supermicro SUPERO PDSBA+ User Manual page 56

PDSBA+/PDSBA/PDSBE User's Manual
Quiet Mode
This setting allows you to Enable or Disable the graphic logo screen during
boot-up.
POST Beeps
Set to Enabled to activate the alarm if an error occurs during bootup. If set to
Disabled, the alarm will not be beeping even if a boot error occurs.
ACPI Mode
Use the setting to determine if you want to employ ACPI (Advanced Confi guration
and Power Interface) power management on your system. The options are
Yes and No.
ACPI Sleep Mode
Use the setting to determine if you want to employ ACPI (Advanced Confi guration
and Power Interface) power management on your system when the system goes
into the sleep mode. The options are S1, S3 and S1S3.
Power Button Behavior
If set to Enabled, the system will power on or power off immediately as soon as
the user hits the power button. The options are Enabled and Disabled.
Resume On Modem Ring
Select On to "wake your system up" when an incoming call is received by
your modem. The options are On and Off.
Resume On PME#
Select On to "wake your system up" from the PME# of PCI slots. The options
are On and Off.
PS2 Keyboard (KB)/Mouse Wake Up
Select Enable to "wake your system up" from the S3, S4 or S5 state. If this
feature is set "enabled", you will also need to enable the JPWAKE jumper by
closing pins 1-2. (*Please refer to Pg. 1-5 and Chapter 2 for more details).
The default setting is Disabled.
Power Loss Control
This setting allows you to choose how the system will react when power returns
after an unexpected loss of power. The options are Stay Off, Power On, and
Last State.
Watch Dog
If enabled, this option will automatically reset the system if the system is not
active for more than 5 minutes. The options are Enabled and Disabled.
Summary Screen
This setting allows you to Enable or Disable the summary screen which displays
the system confi guration during bootup.
4-6