Table of Contents
Advertisement
• Main switch override mechanism
• External modem ring-on
Onboard I/O
• Built in ICH8 SATA Controller, 4 connectors for 4 devices (300MB/S)
• 1 fl oppy port interface (up to 2.88 MB)
• 1 Fast UART 16550 compatible serial port/header
• Intel 82573L Gigabit Ethernet Controller (PCI-E)
• 1 EPP (Enhanced Parallel Port) and ECP (Extended Capabilities Port) with
parallel port supported
• PS/2 mouse and PS/2 keyboard ports
• ITE Controller supports four IDE hard drives (PDSBA+ only)
• Up to 10 USB (Universal Serial Bus) 2.0 ports for a speed of up to 480Mbps
Latest USB 2.0 technology!
• Realtek ALC 883 7.1 Channel High Defi nition Audio (HDA) codecs supports 10
DAC Channels
• Built-in GMCH and Onboard VGA Connector (*PDSBA+/PDSBA only)
Other
• Trusted Platform Module (TPM) support (*PDSBA+/PDSBA only)
• Wake-on-LAN
• Wake-on-Ring (WOR)
• System Bus Clock Frequency Selection (Overclocking) Support (*Note)
• Suspend-to-RAM
• Onboard +3V Standby Power Warning LED ("LE1")
• Pb Free
CD Utilities
• BIOS fl ash upgrade utility
• Drivers and software for Intel G965/P965 chipset utilities
Dimensions
• ATX form factor, 11.6" x 9.6" (294.6 x 243.8 mm)
Note: Please be aware of the following conditions when
"overclocking" is used:
Setting a high CPU FSB Speed (overclocking), DRAM Frequency
or selecting a high CPU V-Core voltage, memory voltage, chipset voltage, ICH
chipset voltage, and FSB termination voltage may result in system instabil-
ity. If this occurs, revert the setting to the default setting. In addition, extra
fans may be needed for proper system cooling. The PDSBA+/PDSBA/PDSBE
offers the option of "overclocking"; however, Supermicro is not responsible for
any damage caused by use of overclocking.
Chapter 1: Introduction
1-7
Advertisement
Table of Contents
