Variable Area (Setting Range) List - Omron WT30-CA2M Operation Manual

Variable Area (Setting Range) List

6-4

Variable Area (Setting Range) List

Variable Address
type (hex) (hex)
80 0000
0001
0002
0003
80 0004
0005
0006
to
0043
80 0044
0045
0046
to
0083
80 0084
0085
0086
to
00C3
80 00C4
00C5
00C6
to
0103
80 0104
86
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The following table lists the variable areas. Items expressed in hexadecimal in
the Set (monitor) value column are the setting ranges for CompoWay/F com-
munications. When there is a section reference for a parameter setting, refer
to that reference for details.
Parameter name
Slave Station entry status
(unit numbers 1 to 16)
Slave Station entry status
(unit numbers 17 to 32)
Slave Station entry status
(unit numbers 33 to 48)
Slave Station entry status
(unit numbers 49 to 64)
Slave Station input data (unit
number 1)
Slave Station input data (unit
number 2)
Slave Station input data (unit
number 3)
to
Slave Station input data (unit
number 64)
Slave Station status (unit
number 1)
Slave Station status (unit
number 2)
Slave Station status (unit
number 3)
to
Slave Station status (unit
number 64)
Communications error (unit
number 1)
Communications error (unit
number 2)
Communications error (unit
number 3)
to
Communications error (unit
number 64)
Received signal strength (unit
number 1)
Received signal strength (unit
number 2)
Received signal strength (unit
number 3)
to
Received signal strength (unit
number 64)
Frequency presently in use
Set (monitor) value
0000H to FFFFH (Refer to 6-5 Slave Station Entry Status.)
0000H to FFFFH (Refer to 6-6 Slave Station Input Data on
page 89.)
0000H to FFFFH (Refer to 6-7 Slave Station Status on
page 90.)
0000H to FFFFH (Refer to 6-8 Number of Communications
Errors on page 91.)
0000H to 09FFH
Reads the received signal strength during operation for each
I/O Slave Station.
Data
Lower byte Received signal strength details. Uses
256 levels from 00H to FF.
Upper byte RSSI display level. Uses 10 levels from
00H to 09H.
0001H to 0053H (Indicates the frequency currently being
used.)
Section 6-4
Description