Turn Signal Switch (All Exc Models); Emergency Off Switch (All Exc Models); Start Button; Map Switch (All Special Models) - KTM 250 EXC TPI 2020 Owner's Manual

6 CONTROLS
6.9
6.10
6.11
6.12
18

Turn signal switch (All EXC models)

E00820-12

Emergency OFF switch (All EXC models)

E00322-10

Start button

E00824-10

Map switch (All special models)

E00859-10
1
Turn signal switch is fitted on the left side of the handlebar.
Possible states
Turn signal off – The turn signal switch is in the cen-
tral position.
Left turn signal, on – The turn signal switch is turned
to the left.
Right turn signal, on – The turn signal switch is
turned to the right.
1
The emergency OFF switch
handlebar.
Possible states
Ignition off – In this position, the ignition circuit
is interrupted, a running engine stops, and a
non-running engine will not start.
Ignition on – In this position, the ignition circuit is
closed, and the engine can be started.
1
Start button is fitted on the right side of the handlebar.
Possible states
• The start button is in the basic position
is pressed – In this position, the starter
• The start button
motor is actuated.
1
The map switch is fitted on the right side of the handlebar.
Possible states
Map switch in position I – The ignition timing map Perfor-
•
mance is active in this position.
Map switch in position II – The ignition timing map Soft is
•
active in this position.
The engine characteristic can be altered with the map switch.
Info
The map switch has no function in the homologated
(restricted) condition of the motorcycle.
is fitted on the right side of the