Setup and installation
4.3 Mounting the monitor
4.3
Mounting the monitor
The monitor has a VESA 400 x 400 adapter and can be installed in a suitable ceiling sus‐
pension or wall mount. The maximum torque is 15 Nm.
Note the following during installation :
•
The screws used for fixing to the suspension unit or mount must meet the following re‐
quirements:
Number
Thread
Strength
Insertion depth
•
Holders must be tested and approved by the manufacturer for the weight to be support‐
ed.
•
An installed stand must be sufficiently stable such that tilting up to 10° does not result in
the monitor toppling.
Note
Wall mount
EIZO recommends the FWM6300wall mount, because it has been tested with the monitor
and meets all necessary conditions.
18
4
M8
8.8 in accordance with ISO 898-1
16 ... 20 mm
Instruction for Use, 11/2013
RadiForce LX600W