Table of Contents
Advertisement
Setup and installation
4.3 Mounting the monitor
4.3 Mounting the monitor
The LS580W has a VESA 400 x 400 adapter and can be installed in a suitable ceiling sus-
pension or wall mount.
Note the following during installation:
•
The maximum torque for attaching to the holder is 10 Nm.
•
The screws used for attaching to the holder must meet the following requirements:
Number
Thread
Strength
Insertion depth
CAUTION
Holders
• Holders must be tested and approved by the manufacturer for the weight to be sup-
ported.
• An installed stand must be sufficiently stable such that tilting up to 10° does not result in
the monitor toppling.
Note
Recommended wall mount
EIZO recommends the FWM6300 wall mount because it has been tested with the monitor
and meets all necessary conditions.
Order No.: 6GF69888AB02
Note
Recommended stand
EIZO recommends the FST5600 stand because it has been tested with the monitor and
meets all necessary conditions.
Order No. 6GF69888BA01
18
4
M8
8.8 in accordance with ISO 898-1
16 - 20 mm
Instructions for Use, 08/2022
RadiForce LS580W
Advertisement
Table of Contents
