Distances And Arrangement Of Units - Eizo RadiForce LX470W Instruction Manual

Application planning

4.2 Distances and arrangement of units

Change of environment
If the unit is brought into a warm environment from a cold one, condensation may form in the
unit. The unit should not be switched on until all the condensed water has evaporated,
including that inside the unit. This may take several hours, depending on the conditions.
See also
General safety notes (Page 10)
Cleaning (Page 55)
4.2 Distances and arrangement of units
Minimum distances from other devices and a wall
The monitor has a VESA-400x200 installation connection. The monitor should be positioned
at least 10 cm at the side and rear from a wall, or 15 cm from other equipment.
The monitor, especially the panel surface, is sensitive to shock. An impact on the panel
surface can lead to total failure. Avoid such mechanical influences at all costs.
If the monitor is installed to be movable
make sure that the moved mass does not endanger persons or fittings.
See also
General safety notes (Page 10)
20
RadiForce® LX470W
Instruction Manual, 06/2012, 1015263-003