Table of Contents
Advertisement
Safety notes
2.1 General safety notes
2.1
General safety notes
Flawless, safe and reliable operation of the equipment assumes that it has been
professionally transported, stored, mounted and installed as well as careful operator control
and service. The units may only be used for applications for which monitors are normally
used.
For safety reasons, the following precautions must be observed:
There is a danger to life if warnings are not obeyed. Severe personal injury or damage to
property may occur. Please observe all warning information present on the display and in
the instruction manual.
Do not open the display
The display may only be opened by trained and qualified personnel. There is risk of an
electric shock.
Components inside the displays are at high voltage. Touching these components is
extremely dangerous!
Servicing and maintenance must be carried out by qualified personnel only.
No liability is accepted for damage to property or injury to persons if the display is opened
by non-qualified personnel.
Never use defective power cables
A damaged power cable may result in fire or electric shock. Only use power cables
approved by the manufacturer.
When disconnecting the power supply cable, always do so by holding the plug. Ensure that
your hands are dry.
Route the cable such that it cannot be tripped over.
Do not insert any objects into the housing
Objects inserted into the housing may result in damage to the unit or personal injury.
Do not place any objects on top of the unit
If you place objects on top of the unit, the unit may overheat.
Liquid entering the unit may result in fire or electric shock.
Connecting
There must be no contact to a patient when handling the connection cables.
Overload
Do not connect too many devices to one socket or extension cable since this could result in
a fire or electric shock.
Observe the information provided by the manufacturer.
10
DANGER
RadiForce® LX470W
Instruction Manual, 06/2012, 1015263-003
Advertisement
Table of Contents
