Henny Penny FlexFusion FPG-221 Additional Installation, Operation And Maintenance Instructions page 36

Performing maintenance
CO and CO test upper burner
2
High
• Exhaust gas values at full load "High" okay? (See chapter "Checking exhaust gas values at partial load" in the
installation instructions).
Measured CO :
2
Measured CO:
CO and CO test upper burner
2
Low
• Exhaust gas values at partial load "Low" okay? (See chapter "Checking exhaust gas values at partial load" in the
installation instructions).
Measured CO :
2
Measured CO:
CO and CO test bottom burner
2
High
• Exhaust gas values at full load "High" okay? (See chapter "Checking exhaust gas values at partial load" in the
installation instructions).
Measured CO :
2
Measured CO:
Low
• Exhaust gas values at partial load "Low" okay? (See chapter "Checking exhaust gas values at partial load" in the
installation instructions).
Measured CO :
2
Measured CO:
• Are the gas-conducting parts inside the unit leak-free?
If no,
Troubleshoot and replace parts as necessary.
Please provide remarks here and attach pictures to warranty claim.
36
Vol %
ppm
Vol %
ppm
Vol %
ppm
Vol %
ppm
Checking for leak tightness inside the unit
Maintenance instructions
Set CO :
2
Set CO:
Set CO :
2
Set CO:
Set CO :
2
Set CO:
Set CO :
2
Set CO:
Vol %
ppm
Vol %
ppm
Vol %
ppm
Vol %
ppm
Yes No