Roland SP-606 Owner's Manual page 83

Sampling workstation
Hide thumbs Also See for SP-606:
Table of Contents

Advertisement

When the SP-606 is connected to your computer via USB, it can send and receive MID] messages, audio signals,
files, and folders. The operating systems that can be used will depend on your setup, as shown in the table below.
Operating System
;
Using the P606 application
Windows XP/2000
Windows 98 or later, Mac:
| Reading/writing memory card data
_| Windows Me/2000/XP, Mac OS 9.0.4 or later
Sor later, Mac OS X 103 or later
| NOTE |
The SP-606's power must be off when you connect or disconnect the USB cable. Never connect or
disconnect the USB cable or turn off the power while data is being transferred or while P606 is
running.
Installing the USB Driver
computer,
Windows XP/2000 users:
From the "DRIVER/FACTORY
DATA CD-ROM" (included), open
"DRIVER\USB_XP2K\README_E.HTM," and install the USB driver as directed in the "Installation"
procedure.
Windows Me/98 users:
From the "DRIVER/FACTORY DATA CD-ROM" (included), open
"DRIVER\USB_ME98\
README_E.HTM,"
and install the USB driver as directed in the
"Installation" procedure.
Mac OS X users:
From the "DRIVER/FACTORY DATA CD-ROM" (included), open "DRIVER\OSX\Readme_E.htm,"
and install the USB driver as directed in the "Installation" procedure.
Mac OS 9 users:
From the "DRIVER/FACTORY
DATA CD-ROM"
(included), open "DRIVER\OS9\ Driver E (Mac OS
9)\Readme_E.htm," and install the USB driver as directed in the "Installation" procedure.
Cea
The P606 application runs only on Windows XP/2000.
Making the USB Connection
NTeyis
In order to use the included P606 sequencer application for Windows, and to take full advantage of
the SP-606's capabilities, you will need to install the included USB driver before you continue with
the procedure below (p. 83).
1.
Use a USB cable to connect the SP-606 to your computer.
2.
Turn on the power of the SP-606 (p. 21).
To change the type of USB driver you are using, you will need to change the "Vender Driver"
setting (p. 84) before starting up your computer.
3.
Start up your computer.
83

Advertisement

Table of Contents
loading

Table of Contents