Table of Contents
Advertisement
[Basic Procedure for Editing Sample Parameters _
Hold down [FUNC] and press pad [13] (SAMPLE PARAM) to get the
SAMPLE
EDIT screen.
The number of the pad you press in step 3 is shown at the lower left of
(Example) PAD 8-1: pad bank 8, pad number 1
The name, grade (STD/LNG, p. 43), monaural/stereo (MONO/
STEREO), and BPM (tempo) of the sample are shown in the bottom line
Go to the Play screen (p. 15).
Press the pad containing the sample whose settings you want to edit.
You can't edit samples of a pad bank that is protected (p. 31).
Use [ w ][ « ] to select the parameter you want to edit.
If you want to edit the parameters of other samples, repeat steps 3-5.
1.
2.
the screen.
of the screen.
3.
a sample.
4.
5.
6.
Press [EXIT] to return to the Play screen.
Sample Parameters
=
Parameter
Value
Explanation
ee
=
os
serene
a
aa
0
L15:
Far left.
~15R
0:
Center
RN D
R15:
Far right.
|
RND:
The panning will change randomly each time the sound is played.
* This cannot be specified for samples recorded in stereo.
ALTERNATE,
SHOT:
The sample will sound each time you strike the pad.
GATE:
The sample will sound only while you hold down the pad.
will be turned off.
POLY:
A repeated strike will sound a new note while the preceding note continues to be
My
-
heard.
7
own BPM (tempo).
PHRASE:
The sample will be played as a phrase. During playback, the BPM of the sample will
automatically match the BPM setting or the BPM of the sequencer. -> "Changing a
Sample's BPM (Tempo)" (p. 52)
Advertisement
Table of Contents
