Table of Contents
Advertisement
Chapter 4. Editing a Sample
| Parameter
| Value
] Explanation
* This cannot be set if "Play Type" is SINGLE.
(Omitting Unwanted Portions)
1.
Go to the Play screen (p. 15).
In the case of a sterea sample, only one of the L/R channels is displayed.
terms of a number of samples.
3.
Press the pad whose sample you want to edit.
If you want to select a sample from a different pad bank, switch the pad
bank (p. 23) and then press a pad to select a sample.
Ce
You can't edit samples in a pad bank that is protected (p. 31).
shorter than approximately 70 ms.
51
Advertisement
Table of Contents
