5.3. Repair instruction
5.3.1. Safety sticker
When
Estimated time to complete [min.]: 10
Required special tools
Required part(s)
1. Prerequisites
•
Locate the damaged safety sticker (s).
2. Remove the safety sticker
•
Switch off and power down the AX-201
•
Lock the main switch with a pad-lock
•
Remove the damaged sticker
3. Place the new safety sticker
•
Remove old glue and dirt from the old
sticker.
•
Clean the surface with isopropanol
•
Place the new safety sticker on the same
spot as the removed one.
38
If any of the safety stickers is damaged
N.A.
Safety sticker (9498-396-02441)