Table of Contents
Advertisement
3.3.1.2. cpl.cfg
In the cpl.cfg file specific configuration settings are stored that enables the AX-201 to communicate with
the coplanarity checker.
The settings are:
[GENERAL]
SYNTAX_VERSION = 1
[CPL]
; Communication Timeout in [ms]
; Timeout in connection to the Coplanarity Host
COMM_TIMEOUT = 5000
; Measurement Result Timeout in [ms]
MEASURE_TIMEOUT = 10000
; Connection IP Address of the Coplanarity Host
HOST_IP = 192.168.1.10
; Save Measurement Result Images
; (Please note that this setting only has effect
; if the 'DiagnosticsLevel' setting in the SETTINGS.XML file = 1 or 2)
;
Possible values:
;
0 = SAVE IS DISABLED
;
1 = SAVE ON MEASUREMENT ERRORS
;
2 = SAVE EACH MEASURED COMPONENT
SAVE_IMAGES = 1
; Special setting for internal testing only
RUN_WITH_HOST_SIMULATOR = 0
19
Advertisement
Table of Contents
