Update Ale File; Create Placement Programs - Philips AX-201 Option Manual

3.4.2.1. Update Ale file

•
Open the Assembly Line Editor and
update the ALE file.
•
Add Coplanarity on module position
1 (configures the reuse unit on
position 3 with the help of the AX-
201 GUI):
o Add next Machine – Attribute:
o ModulePosition1 =
Coplanarity.
•
Add Coplanarity on module position
3 (configures the reuse unit on
position 1 with the help of the AX-
201 GUI):
o Add next Machine – Attribute:
o ModulePosition3 =
Coplanarity.

3.4.2.2. Create placement programs

•
Create placement programs with PPs-Pro:
When the assembly production line consists of an AX301/501 and AX201 with a
o
coplanarity unit then all coplanarity defined components in the PSI file will be mounted on the
AX201.
When a component must be mounted with coplanarity (PSI file) and no coplanarity unit is
o
configured on the production line then an error message will be generated
•
Load the placement programs to the machine
30