SATO ARGOX iX4-280 Series User Manual page 25

iX4-280/380 Series Printer
User Manual
Load Media in Rotary Cutter Mode
Steps 1 to 3 are the similar to "Standard Mode".
1. Lift the top cover to expose the media compartment.
2. Load a roll of media into the media supply spindle and slide the media guide
inward.
3. Rotate the head latch counterclockwise and turn on the outside media guide.
4. Load the media roll under the print head module and under the paper sensor
guide over the roller. For more specific lead media, see Step 4 in Standard Mode.
Print head
module
Roller
20