SATO ARGOX iX4-280 Series User Manual page 45

iX4-280/380 Series Printer
User Manual
25. Backfeed Enabled/Disabled
Enable or disable backfeed during the printing process. When it is enabled,
the printer moves the paper forward in a predefined length 1 second after
printing, and pulls the paper back in a predefined length once the printing
begins again. When it is disabled, the printer won't move the paper at all.
26. Cutter Enabled/Disabled
Enable or disable the cutter during the printing process.
27. Peeler Enabled/Disabled
Enable or disable the dispenser (peeler) during the printing process.
28. Cutter/Peeler Offset
Move the cutting line or the peeling position forward or backward. The
value in the angle brackets is the offset unit.
29. IP Address
The static IP address of the printer. The default value is "192.168.1.1".
30. Subnet Mask
The manually specified subnet mask of the printer. The default value is
"255.255.255.0."
31. Gateway
The manually specified gateway of the printer. The default value is "0.0.0.0."
32. MAC Address
The unique address assigned to the printer that connects to the internet.
33. DHCP
When DHCP is enabled, it assigns an IP address to the printer automatically.
34. DHCP Client ID
It is an arbitrary value sent to the DHCP server to reserve an IP address for
the printer.
35. DHCP Host Name
The name of a DHCP client.
36. SNMP
When it is enabled, the host gets or sets parameters registered as SNMP
entities.
37. Socket Communication
When it is enabled, the host communicates with the printer via the socket.
40