Table of Contents
Advertisement
FOStGX
PD-4 DIGITAL AUDIO RECORDER_
50)
POWER SEL switch
This switch is used to select between the internal battery (NP-IB) and the external
power supply. Select between EXT (external power supply) and INT (internal battery).
See page 22 for details.
51)
Battery EJECT lever
Press this lever to eject the internal battery (NP-IB).
52)
Battery compartment
Figure 9
LCD panel
53)
ID (SKIP-ID, END-ID, and S-ID) indicators
When the PD-4 reads one of these symbols on the tape, the corresponding indicator will be
illuminated. These symbols last 300 ±30 frames (about 9 seconds) except for SKIP-ID
which is 33 ±3 frames (about one second).
Only the S-ID (start id) can be recorded. Press the S-ID key (16) during record mode.
The indicator will flash slowly while the symbol is recorded.
54)
Sample rate (48kHz and 44.1 kHz) indicators
The current sample rate is illuminated. If the sample rate is 48.048 kHz, the 48kHz
indicator will flash slowly.
r
i
i
u
I
[_
U
18
Controls 8c Connections
Advertisement
Table of Contents
