Transport Controls - Fostex PD-4 Owner's Manual

Portable digital audio recorder

Hide thumbs Also See for PD-4:

Table of Contents

Fostex

PD-4 DIGITAL AUDIO RECORDER_

TC (Time Code) OUT switch

This switch selects the source of the time code that is to be output through the TC OUT

connector. GEN selects the internal clock. REPRO selects the time code specified by the

SETUP mode functions 403 and 408 (see page 49).

TC GEN MODE selector switch

This rotary switch is used to select the time code type. You can select from the

following types:

24H RUN / REC RUN / FREE RUN / EXT RUN

The JAM key (40) can be used to synchronize the internal generator to external time

code. See page 37 for details.

FRAME RATE selector switch

This rotary switch is used to select the time code frame rate of the internal generator.

You can select from the following frame rates:

30 / 30DF / 29.97 / 29.97DF / 25 / 24

This switch can be overridden during playback by SETUP mode function 401. See page

49 for details.

^ ^

Transport controls

Figure 3

Transport controls

Controls & Connections

Table of Contents