Mirror - Audi Q5 2016 Owner's Manual

.....
N
co
~
CX)
.....
I.Cl
U"I
.....
I.Cl
.....
- To help prevent damage to the wiper sys -
tem, a lways loosen blades which are frozen
to the windshield before operating wipers .
- To help prevent damage to wiper blades, do
not use gasoline, kerosene, paint thinner, or
other solvents on or near the wiper blades.
- To help prevent damage to the wiper arms
or other components, do not attempt to
move the wipers by hand.
@
Tips
- Comme rcial hot waxes applied by automatic
car washes affect the how easi ly the glass
surface can be cleaned.
- You can also use the service position, for ex-
ample, if you want to protect the windsh ield
from icing by using a cover.
Replacing the rear wiper blade
C
Fig. 59 Rear wiper: Removing t he wiper blade
Removing the wiper blade
.. Fold the windshield wiper arm away from the
windshield.
.. Pull the wiper blade and holder out of the
mount.
Attaching the wiper blade
.,. Press the wiper blade ho lder in the arrow direc-
tion ¢ fig . 59 into the mount.
.. Fold the windshield wiper arm back onto the
windshield .
.&_
WARNING
-
For safety reasons, the windsh ield wiper
blades should be replaced once or twice each
year .
Lights and V is ion
Mirror
Adjusting the exterior mirrors
Fig. 60 Forward section of driver's armr est : power mirror
contro ls
Adjusting exterior mirrors
.,. Rotate the knob to the © posit ion (driver's ex-
t er ior mir ror) or to t he ® pos ition (passenger's
exterior m irror)¢ fig. 60.
.. Rotate the knob and the mirror so that you
have a clear view to the rear.
Heated mirrors
.,. Rotate the knob to pos it ion @ .
Folding both exterior mirrors*
.. Turn the knob to position @ .
Depend ing on the outside temperature, the mir-
ror surfaces are heated until the ignition is
switched off- even if the knob is no longer in po-
sition @ .
You are well-advised to fold the exterior m irrors
in when maneuvering in tight spaces or when
leaving the car parked close to other veh icles.
Memory for exterior mirrors*
On vehicles with memory fo r the driver's seat, the
current setting for the exterior mirrors is auto-
matically stored along with the seat position
¢ page
65.
Tilt function for the passenger's mirror*
When the reverse gear is engaged, the mirror
surface tilts downward slightly if the setting is
for the passenger's mirror (knob in position ®
¢ fig. 60). This allows you to see the curb during
parallel parking. ..,.
59