Audi Q5 2016 Owner's Manual page 53

,....,
N
co
er::
co
,....,
<J:)
Lil
,....,
<J:)
,....,
Rolling code programming
App lies to vehicles: with garage door opener (Homelink)
Rolling code programming is also needed for
some systems.
Ident ifying a rolling code
~
Press and hold the button in the roof headliner
that was already programmed .
~
Watch the LED @ ¢ page 49, fig. 44. If the LED
blinks quickly, the systems (such as a garage
door) is equ ipped with a rolling code.
~ Program the rolling code as follows:
Activati ng the motor unit in a system
~
Locate the programming button on the sys-
tem's motor unit. The exact location and color
of the button may vary depending on the brand
of the system.
~
Press the programm ing button on the garage
door opener motor unit (th is will usually acti-
vate an "indicator" on the moto r unit). You now
have approximate ly 30 sec onds to program the
button in the roof headliner .
Programming the button in the roof
headline r
~
Press and hold the previously programmed but -
ton in the roof headliner for 2 seconds.
~
To end rolling code programming, press and
hold the button again for two seconds .
~
With some systems, the button may need to be
pressed a third time t o end the programming
process .
After programming, the system should detect
the signal and beg in moving when the button in
the roof headliner is pressed . Now you may pro-
gram the other buttons as needed.
(D
Tips
- The rolling code can be programmed more
quickly and more easily with the help of a
second person .
- If you have difficulty programm ing the roll-
ing code, referring to the user guide for the
system may help.
Op e ning and cl os ing
5 1